Volkswagen Corrado VR6 Specs

**Corrado VR6 Engine**
Displacement	2861cc
Layout	6-cylinders in a 15° V (VR6 is “V-Reihenmotor” or “V in-line”).
Installation	Transverse. Front-wheel drive. Electronic Limited Slip Differential (through ABS sensors) below 15mph
Valve gear	2 valves per cylinder, Single camshaft per bank. Hydraulic maintenance free tappets.
Bore & Stroke	82.0 x 90.3mm
Compression ratio	10.1:1
Peak power	190bhp (140kW) at 5800 rpm
Peak torque	181lb ft (245Nm) at 4200 rpm
Specific output	66bhp/litre
Ignition / fuel	Bosch Motronic fuel injection, fully mapped ignition, catalytic converter.
Battery V/A (Ah)	12/280 (60)
Alternator, amps	70

**Corrado VR6 Suspension**
Front	MacPherson struts (Sachs dampers), lower wishbones, coil springs, anti-roll bar. Track stabilising steering geometry.
Rear	Trailing arms with track-correcting bearings, torsion beam axle, anti-roll bar.

**Corrado VR6 Steering**
Type	Rack and pinion
Lock to lock	3.1 turns

**Corrado VR6 Brakes**
Overview	Diagonally split circuits. Brake servo and load-sensitive brake pressure regulator.
Front	280mm ventilated discs
Rear	226mm discs
ABS	Standard